External USB for DVD duplicator controllers

DVD Duplicator from Copystars has new USB option.

External USB Connector board for Duplicator

External USB bridge board for duplicator set the first CD/DVD target drive as an external CD/DVD burner for your computer. USB connection can be enabled and disabled by the switch located on the back of the card. A USB (A to B cable) is required to establish the connection between the computer and the device. USB 2.0 Specifications: Provide 2 channel IDE connector , can break into the orignal CD-DUPLICATOR. By External switcher select the CD-DUPLICATOR or PLAYER IDE Bus working in Orignal mode or in USB2.0 mode. When switch to USB mode , the connected Device just become a protable device. Can be controlled by Any PC with USB Host. Very easy to upgrade your product become USB protable device. Physical Characteristics: CON1 (IDE40 PIN): Connect CD-RW device CON2 (IDE40 PIN): Connect CD-DUPLICATOR device J1: Connect small power connection(Connect FLOPPY Power connection) Green LED On: CON1 DATA ACCESS Red LED On: USB Mode SWITCH on USB Connect: USB ACTIVE SWITCH on LED Connection: DUPLICATOR ACTIVE H/W: USB2.0 chip(GENESYS or Cypress)support ATA Device or ATAPI device. OS: Win95/98/me , Win NT , Win2000 , WinXP S/W: Win98/95 Drivers , MAC driver supported It can use on Athena, Wytron, Copystars and Acard controllers Designed to fit Xcase Storage Tower, Xcase duplicator case or other brand case with SCSI-1 (Centronic 50-pin) back panel