External USB bridge board for duplicator set the first CD/DVD target drive as an external CD/DVD burner for your computer. USB connection can be enabled and disabled by the switch located on the back of the card. A USB (A to B cable) is required to establish the connection between the computer and the device.
USB 2.0 Specifications:
Provide 2 channel IDE connector , can break into the orignal CD-DUPLICATOR. By External switcher select the CD-DUPLICATOR or PLAYER IDE Bus working in Orignal mode or in USB2.0 mode. When switch to USB mode , the connected Device just become a protable device. Can be controlled by Any PC with USB Host. Very easy to upgrade your product become USB protable device.
Physical Characteristics:
CON1 (IDE40 PIN): Connect CD-RW device
CON2 (IDE40 PIN): Connect CD-DUPLICATOR device
J1: Connect small power connection(Connect FLOPPY Power connection)
Green LED On: CON1 DATA ACCESS
Red LED On: USB Mode
SWITCH on USB Connect: USB ACTIVE
SWITCH on LED Connection: DUPLICATOR ACTIVE H/W: USB2.0 chip(GENESYS or Cypress)support ATA Device or ATAPI device.
OS: Win95/98/me , Win NT , Win2000 , WinXP
S/W: Win98/95 Drivers , MAC driver supported
It can use on Athena, Wytron, Copystars and Acard controllers
Designed to fit Xcase Storage Tower, Xcase Pro duplicator case or other brand case with SCSI-1 (Centronic 50-pin) back panel
|
|
|
