DVD Duplicator controller, DVD duplicator controllers

512MB memory Copystars 1 to 7 target sata daisy chain cd dvd duplicator controller This inter connectivity enables one controller to manage an array of multiple-target duplicator towers for a unified operation with master content from a single source.

Price: $255.00

Copystars Sata Blu-Ray/ CD/ DVD duplicator controller support 1 to 7 target cd dvd duplicator controller with 128 mb DDR2 buffer memory. Fully standalone.

Price: $97.50

Copystars SATA external USB bridge board connector for duplicator set the first CD/DVD target drive as an external CD/DVD burner for your computer. USB connection can be enabled and disabled by the switch located on the back of the card. A USB (A to B cable) is required to establish the connection between the computer and the device. Designed to fit Xcase Storage Tower, Xcase pro, Mapower and duplicator case or other brand case with SCSI-1 (Centronic 50-pin) back panel

Price: $40.00

Acard Ars-2050 1 to 10 SATA burner BD/HD DVD Duplicator Controller support 10 target of blu ray/CD/DVD

Price: $119.00

Acard Ars-2053P 1 to 3 SATA burner BD/HD DVD Duplicator Controller

Price: $78.00

Copystars 1 to 3 target cd dvd duplicator controller with 32 mb buffer memory - support 3 DVD or CD burners,duplicate 3 DVD/CD simultaneously. - High performance Dual Format DVD/CDR, support for multiple DVD/CD Formats.

Price: $76.00

Copystars 1 to 11 target cd dvd duplicator controller with 128 mb buffer memory.Support 11 DVD or CD burners,duplicate 11 DVD/CD simultaneously.High performance Dual Format DVD/CDR, support for multiple DVD/CD Formats.

Price: $125.00

Wytron DVD-899 12 target sata duplicator controller has 128MB memory built-in to enhance CD DVD blu-ray duplication. Wytron DVD-898 designed with Independent channels for each SATA port for best performance

Price: $190.00

Wytron dvd 688 dvd duplicator 1 to 10 target 64mb CD DVD duplicator controller using unique duplication technolgy from Wytron.
UDMA66 transfer mode compliance.
64MB buffer built-in.
11 ports on-board to connect from 1 to 10 targets of 52X CD writer or 16x 18x DVD writer.
Large scale back-lighted 20 x 2 LCD display.
Hard drive connection supported.
RS-232 x 2 ports built-in.
Robot arm connection supported.
Versatile settings for optimal duplication.
1 year warranty
Wytron do not include operation manual in the package any more.

Price: $131.00

ATA 66 / 100 IDE Cable, Ultra DMA EIDE flat ribbon interface cables for hard drives with 3-connectors, 18" 18-inch ATA66 IDE ribbon cable for your ultra DMA 66 hard drives and motherboards. OEM in individual plastic bags. ATA 66 cables have 40-pin connectors but with 80 cables (wires). Three connectors for up to two devices. It has 80 wires but 39 pins (one blocked), which makes it backward compatible with the DMA33 IDE cables. Yes, that means this cable will work with an old ATA33 hard drive/motherboard/CD ROM. Check the IDE connector on your motherboards. Ensure that it has 39 pins instead of 40. If it has 40, this cable may or may not work with your motherboard. The connectors are color-coded for ATA66. The blue connector is for the motherboard. The middle, gray one must be connected to the master hard drive. The black, end one is for a slave drive if there is one. Cables for hard drives, CD-ROM, DVD, CD-RW & other IDE devices,

Price: $2.59

Copystars 1 to 11 target cd dvd duplicator controller with 128 mb buffer memory.Support 11 DVD or CD burners,duplicate 11 DVD/CD simultaneously.High performance Dual Format DVD/CDR, support for multiple DVD/CD Formats.

Price: $125.00