Acard Ars-2053P 1 to 3 SATA burner BD/HD DVD Duplicator Controller is a standalone DVD/CD
duplicate controller supporting high speed SATA BD/DVD/CD writers. With ACARD
RISC CPU Engine, it doesn't need connecting to a computer or require much
learning. Simply through the LCD and the button on the panel you can use the
DVD/CD duplicate controller to back up data, audio or video BD/DVD/CD quickly.
The first support SATA BD/DVD drives for recording BD/DVD/CD quickly. It is
quite fit for general offices.
A standalone SATA-to-SATA BD/DVD/CD DVD/CD duplicate controller
Totally independent without installing hardware or software
Supports a built-in 3.5" or 2.5" SATA hard disk drive
Supports high-speed SATA BD/DVD/CD recording
Has a user-friendly interface and shows messages with LCD
Firmware update by DVD-ROM
Specifications
ACARD ATP8620 IDE/SATA processor
ACARD ARC772 IDE/SATA bridge
ACARD ARC810 32-bit RISC CPU
64MB SDRAM for data buffer
3 SATA interface channel
2 X 16 LCD screen
A membrane 4-buttons operation panel with 2-buttons hot key
512KB flash memory for copy code
Dimension: 150mm(W)� 42mm(H)� 145mm(D)
System Requirement
Upright external case 7/8 X 5.25"
Power supply of 300W
SATA cable
Digital DVD-ROM x 1
Digital DVD writer x 3
SATA hard disk drive (optional)
Tray (optional)
|
|
|
